Chauvet Colordash Manuale Utente Scaricare il pdf (Pagina 8)

COLORdash™ Accent User Manual 6 6/22/2009 4:15 PM

Rigging (Cont.)

Mounting clamps are sold separately

Fixture Linking

You will need a serial data link to run light shows of one or more fixtures using a DMX controller or to

run synchronized shows on two or more fixtures set to a master/slave operating mode. The

combined number of channels required by all the fixtures on a serial data link determines the number

of fixtures the data link can support.

The fixtures must be linked using DMX cable in a daisy chain (serial) fashion. To comply with

the EIA-485 standard, no more than 32 fixtures should be connected on one daisy chain

without using a DMX optically-isolated splitter. Doing otherwise may result in deterioration of

the digital DMX signal.

USITT recommends limiting the total length of the DMX cable (from the first fixture/controller

to the last fixture) to 300 ~ 455 m (985 ~ 1,500 ft).

Data Cabling

To link fixtures together you must obtain data cables. You can purchase CHAUVET certified DMX

cables directly from a dealer/distributor or construct your own cable. If you choose to create your own

cable, please use data-grade cables that can carry a high quality signal and are less prone to

electromagnetic interference.

Double-

bracket

Yoke/Floor

Stand

Hanging

Clamp

Bracket

Adjustment

Knob

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Nessun commento

Chauvet Colordash Manuale Utente Pagina 8