Chauvet Colordash Manuale Utente Scaricare il pdf (Pagina 7)

COLORdash™ Accent User Manual 5 6/22/2009 4:15 PM

3. SETUP

AC Power

This fixture has an auto-switching power supply that can accommodate a wide range of input

voltages (100 ~ 240 VAC, 50/60 Hz). Before powering on the unit, make sure the line voltage to

which you are connecting it is within the range of accepted voltages.

Always connect the fixture to a switched circuit. Never connect the fixture to a rheostat

(variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used only as a

0 to 100% switch.

To determine the power requirements for a particular fixture, see the label affixed to the back plate of

the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating indicates its

average current draw under normal conditions.

Always connect the fixture to a circuit with a suitable electrical ground.

Mounting

Orientation

This fixture may be mounted in any safe position, provided there is adequate room for ventilation.

Rigging

The fixture includes a mounting yoke to which a rigging clamp can be attached. You must supply

your own clamp and make sure the clamp is capable of supporting the weight of this fixture. You can

order “C” and “O”-clamps from any CHAUVET dealer or distributor (CLP-15, CLP-06 recommended).

There are two types of applications for this fixture: floor stand for up lighting, and overhead use for

down lighting.

If you are using this fixture for down lighting, you must use at least one safety cable/chain for

each fixture in addition to the double-bracket yoke.

If hanging the fixture for overhead use please follow the below steps:

1) Block access below the work area and use a suitable and stable platform when installing or

servicing fixture.

2) Always use safety cables. The safety cable must be capable of holding 10 times the weight of

the fixture.

3) Verify that the structure can hold 10 times the weight of all to-be installed fixtures.

After prolonged periods of operation, the fixture’s chassis may reach high temperatures. This

fixture must be mounted in a ventilated location, as it uses natural convection cooling.

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Nessun commento

Chauvet Colordash Manuale Utente Pagina 7