Operation
-10- COLORdash™ Accent User Manual Rev. 5
Modes
DIP 10 DIP 11 DIP 12 Function
It is possible to change the product’s various operation modes, DMX address, Auto, or Static
mode settings while the product is on. Always make sure that you have clear access to the DIP
switches on the back of the product for easier product changes.
When any of the DMX modes is active as per the Operation Modes Table, you may select the
product’s starting DMX address (001–512) by setting DIP switches [1] through [9] as per the
DIP Switch
1 2 3 4 5 6 7 8 9
Value
1 2 4 8 16 32 64 128 256
1. Set DIP switches [10] through [12] to select a DMX operation mode, as per the Operation
Modes Table.
2. Select the desired starting address (001–512) by setting DIP switches [1] through [9] to ON
or OFF until the sum of the value of the DIP switches in the ON position matches the
desired address number.
3. Refer to the examples below for more information.
Examples
These three examples are for STAGE1 DMX mode. Therefore, in all three cases, DIP switches
[10], [11], and [12] are set to OFF.
a. To select DMX Address 1, set DIP switch [1] to ON.
b. To select DMX Address 64, set DIP switch [7] to ON.
c. To select DMX Address 31, set DIP switches [1], [2], [3], [4], and [5] to ON
( 1+ 2 + 4 + 8 + 16 = 31).
If you are not familiar with or need more information about DMX standards or the DMX
cables needed to link this product to a DMX controller, download the DMX Primer from
the CHAUVET® website: www.chauvetlighting.com/download/pro.
Commenti su questo manuale